G201608TPL IP66 Outdoor Rated Electronics Enclosure
● Genesis line, Polycarbonate Enclosures
● UL/cUL NEMA TYPE 4X IP66
● Integrated Mounting Flange
● Three Point Latch
● Hinged
● Opaque cover
● Enclosure size: 20x16x8
The G201608TPL is a hinged polycarbonate enclosure from our Genesis Line. It features a continuous piano hinge, molded-in mounting flanges, pad-lockable hasp, and a slotted 3-point latch handle. This NEMA 4X / IP 66 rated enclosure includes a hydrophobic polyurethane gasket for a dust-tight, water-tight seal. Designed to handle a wide range of components, this enclosure features extra mounting bosses on the base and cover and Integra’s Multi-Max mounting rails, allowing for additional component mounting on the enclosure side walls. With approximate internal dimensions of 17 x 21 x 9, this large electronics enclosure provides ample space for various components and battery back-ups.
$1,304.00
Call factory for OEM and quantity discounts
*TAX EXEMPT STATUS REQUIRED TO ORDER DIRECT*
If you don’t have a Tax Exempt or Resale Certificate, you can order from an online distributor, such as
Aluminum Back Panel /Swing Panel for Genesis 20"x 16"x 8" Enclosures
Panel Dimension: 18.88 x 14.88 inches
Includes Four Mounting Screws
PVC Back Panel/Swing Panel for Genesis 20"x 16"x 8" Enclosures.
Panel Size: 18.88 x 14.88 inches.
Includes Four Mounting Screws
Steel Back Panel for 20" x 16" Genesis Enclosure
Panel Dimensions: 18.88 x 14.88 inches
Includes four mounting screws
White Powder Coat Finish
For 16" Wide Genesis Enclosure - 10" to 12" Pole
Kit contains all galvanized steel components and zinc-plated steel fasteners, designed to securely fasten your Integra enclosure to a metal pole.
For 16" wide Genesis enclosure - 2" pole
These kits contain all galvanized steel components and zinc- plated steel fasteners, designed to securely fasten your Integra enclosure to a metal pole
Pole Mount Kit for 16" wide enclosure and 3" wide pole.
Kit contains all galvanized steel components and zinc-plated steel fasteners, designed to securely fasten your Integra enclosure to a metal pole.
For 16" Wide Genesis Enclosure - 4" pole
Kit contains all galvanized steel components and zinc-plated steel fasteners, designed to securely fasten your Integra enclosure to a metal pole.
Mounting Feet Kit - Premium Line-Gray
Includes Four Mounting Screws
Mounting Flange Kit 16"
Includes Four Mounting Screws
Swing Out Kit for 20"x16"x08" Enclosures.
Kit Includes: 20" Aluminum Back Panel (ABP-2016), 24" Aluminum Piano Hinge, Panel Pads (KIT-GPP-2016) and Hardware
Swing Out Kit for 20"x16"x08" Enclosures.
Kit Includes: Aluminum Hinge for Swing Panel 20", Panel Pads (KIT-GPP) and Hardware
Panel sold separately
Steel Swing Panel Kit for 20" x 16" Genesis Enclosure
Panel Dimensions: 18.88 x 14.88 inches.
Kit contains Steel Swing Panel and all harware
White Powder Coat Finish
DIN Rail Kit for 16" Premium Enclosure(2 rails, 4 screws)
Set of 12 Screws for Genesis Multi-Max Rail System
GMMR-Screws contains screws only. Rails not included.
Stiffener Ring for Genesis 20"x16"x08" Enclosures
Multi-Max Rails with Screws 8" depth - Set of 4
Used with Genesis 20"x16"x08" Enclosure.
Non-metallic latches - Set of two locking hasp latches for Genesis Series enclosures.
G201608 enclosures require one set (2 latches)
G242410 enclosures require two sets (4 latches)
Panel Pad Kit - Used with Genesis 20"x16"x08" Enclosure.
Kit includes four Panel Brackets that mount on Multi-max Rail.
Mounting hardware included
Clear replacement cover for 20"x 16" Genesis Enclosure. Gasket installed and cover screw kit included.
Opaque replacement cover for 20"x 16" Genesis Enclosure. Gasket installed and cover screw kit included.
Fan Shroud Kit - One Piece (Includes gasketed shroud and mounting hardware)
Fan Shroud Kit - Set of two (Includes gasketed covers and mounting hardware)
Fan Shroud Vent Filter Kit Gray
To make this a Forced Air solution look for KIT-FAN part numbers.
Fan Shroud Vent Filter Kit Gray - Set of two
To make this a Forced Air solution look for KIT-FAN part numbers.
Dimensions
(Mounting Feet/Flange, Hinge and Latch included in dimensions)
Approximate External Dimensions – 21.07 x 24.15 x 9.41 inches
Approximate Internal Dimensions – 17.12 x 21.12 x 9.03 inches
Wall Thickness – 0.23 inches
Weight – 17.68 lbs
General
Color – Light Gray with gloss finish
Material – Polycarbonate
Country of Origin – United States
Construction
Internal Mounting options – Brass inserts on rear wall and lid
External Mounting Style – Integrated Mounting Flange
Gasket type/ material – Hydro-Phobic Urethane peel and stick gasket
3rd Party Ratings
UL-50/c-UL Listed (file #E207562)
NEMA ratings – NEMA 1, 2, 3, 3R, 3RX, 3S, 3SX, 4, 4X, 5, 12, 13
IP ratings – IP66
Impact rating – IK10
Temperature range, -40 to 265 Deg. F
Outdoor UV exposure – f1 rated
UL-94 Flame Rated
Our wide range of products and unmatched manufacturing capabilities help us create the best enclosure solution for you.
